A **Canon GX4070 printer not printing** can stop your work even when the printer is turned on, 👉 1-866-490-0338(USA/UK) ☎️ connected to Wi-Fi, and showing no major error. In many cases, the issue is not permanent damage. It is usually caused by a stuck print queue, wrong printer selection, paper setting mismatch, offline status, weak network connection, driver issue, clogged printhead, or ink-flow problem.
The Canon MAXIFY GX4070 is a wireless MegaTank inkjet printer built for small work teams, so most “not printing” problems are linked to connection, driver, ink, paper, or maintenance settings rather than the printer being completely faulty. ([Canon][1])
.. Quick Answer: How to Fix Canon GX4070 Printer Not Printing
To fix a **Canon GX4070 printer not printing**, restart the printer and computer, check the printer’s power light, confirm the USB or Wi-Fi connection, cancel stuck print jobs, set the GX4070 as the default printer, check paper settings, update or reinstall the Canon GX4070 driver, and run nozzle check or printhead cleaning if pages are blank.
.. First Check: Is the Printer Not Printing Anything or Printing Blank Pages? 👉 1-866-490-0338(USA/UK) ☎️
Before trying every fix, identify the exact problem. This saves time.
| Problem You See | Most Likely Cause | First Fix to Try |
| - | | - |
| Print job stuck | Queue or driver issue | Cancel all print jobs |
| Printer offline | Network or Windows status issue | Reconnect Wi-Fi and set online |
| Blank page prints | Ink flow or printhead issue | Run nozzle check |
| Nothing happens | Connection or wrong printer selected | Check default printer |
| Error on LCD | Paper, ink, or setting mismatch | Follow screen message |
| Not printing from laptop | Driver or Wi-Fi issue | Reinstall driver |
| Not printing after refill | Ink system or air issue | Check ink tanks and maintenance |
Canon’s own GX4070/G4070-series troubleshooting guidance starts with basic checks such as confirming the printer is turned on, checking the computer connection, and making sure paper settings match the rear tray information. ([Canon Manuals][2])
.. 1. Restart the Canon GX4070 Properly
Start with a clean restart. This clears temporary printer memory, frozen jobs, and minor connection faults.
Follow these steps:
1. Turn off the Canon GX4070.
2. Unplug the power cable from the wall socket.
3. Restart your computer, laptop, or phone.
4. Restart your Wi-Fi router if using wireless printing.
5. Wait for 60 seconds.
6. Plug the printer back in.
7. Turn it on and wait until it becomes ready.
8. Try printing a simple test page.
Do not send multiple print commands while the printer is restarting. That can create more stuck jobs in the queue.
.. 2. Check the Power Light and Printer Status
If the printer is still initializing, printing may not start immediately. Canon notes that the ON lamp may flash while the printer initializes or while the computer is sending large data, and users should wait until the lamp remains lit. ([Canon Manuals][2])
Check these things:
* Is the power light steady? 👉 1-866-490-0338(USA/UK) ☎️
* Is the printer making startup sounds? 👉 1-866-490-0338(USA/UK) ☎️
* Is there any error message on the display? 👉 1-866-490-0338(USA/UK) ☎️
* Is the printer stuck on processing? 👉 1-866-490-0338(USA/UK) ☎️
* Is the paper loaded correctly? 👉 1-866-490-0338(USA/UK) ☎️
* Are the covers fully closed? 👉 1-866-490-0338(USA/UK) ☎️
If the printer screen shows a specific message, fix that first. A paper, cover, ink, or tray message can block printing until cleared.
.. 3. Clear the Print Queue
A stuck document can stop all new print jobs. This is one of the most common reasons a Canon GX4070 does not print even when everything looks connected.
..# On Windows
1. Open **Settings**.
2. Go to **Bluetooth & devices**.
3. Select **Printers & scanners**.
4. Choose **Canon GX4070**.
5. Click **Open print queue**.
6. Cancel all pending jobs.
7. Restart the printer.
8. Send one fresh test print.
..# On Mac
1. Open **System Settings**.
2. Go to **Printers & Scanners**.
3. Select your Canon GX4070.
4. Open the print queue.
5. Cancel stuck documents.
6. Try printing again.
If the same file keeps getting stuck, test with a simple Notepad or TextEdit document. The original file may be too large, damaged, or using unsupported print settings.
.. 4. Make Sure Canon GX4070 Is Set as the Default Printer
Your computer may be sending the file to another printer, an old Canon profile, or a PDF printer.
On Windows:
1. Open **Settings**.
2. Go to **Bluetooth & devices > Printers & scanners**.
3. Select **Canon GX4070**.
4. Click **Set as default** if available.
5. Turn off **Let Windows manage my default printer** if Windows keeps switching printers.
Avoid choosing:
* Microsoft Print to PDF
* OneNote printer
* Old Canon printer copy
* Offline Canon printer entry
* Duplicate GX4070 listing
If you see two Canon GX4070 entries, try printing from the one that shows online or remove the duplicate and add the printer again.
.. 5. Fix Canon GX4070 Offline Status
If the Canon GX4070 shows offline, your computer cannot communicate with it. Canon’s printing problems page includes “Change to Offline (Windows)” as one of the printing-related issues users may need to resolve. ([Canon Manuals][3])
Try this on Windows:
1. Open **Control Panel**.
2. Go to **Devices and Printers**.
3. Right-click the Canon GX4070.
4. Select **See what’s printing**.
5. Click **Printer** from the top menu.
6. Uncheck **Use Printer Offline**.
7. Uncheck **Pause Printing**.
8. Try printing again.
If the printer goes offline again, the issue is likely Wi-Fi, IP address, driver, or router related.
.. 6. Check USB or Wi-Fi Connection
Canon’s official troubleshooting says that if using USB, the cable should be securely connected to both the printer and computer. It also advises connecting directly instead of through a USB hub when testing. For network use, Canon recommends confirming the printer is correctly set up for network use. ([Canon Manuals][2])
..# If using USB
Check:
* Cable is not loose.
* Cable is connected directly to the computer.
* USB hub is removed during testing.
* Another USB port is tried.
* A different cable is tested if possible.
..# If using Wi-Fi
Check:
* Printer and computer are on the same Wi-Fi network.
* Printer is not connected to guest Wi-Fi.
* Router is not too far away.
* Wi-Fi light/status looks normal.
* VPN is not blocking printer discovery.
* Router was restarted recently.
Canon also mentions its Wi-Fi Connection Assistant as a tool to diagnose and repair network status for supported Windows and macOS setups. ([Canon Manuals][2])
.. 7. Match the Paper Size and Tray Settings
The Canon GX4070 may refuse to print if the paper setting on the printer does not match the paper setting sent from your computer or app. Canon’s troubleshooting guidance says paper settings should match the information set for the rear tray, and an LCD error may appear if they do not match. ([Canon Manuals][2])
Check:
* Paper size: A4, Letter, Legal, etc.
* Paper type: Plain paper, photo paper, envelope, etc.
* Rear tray paper setting
* App print setting
* Driver print preference
* Printer display message
Example: If the printer is set to A4 but your document is being sent as Letter, the GX4070 may pause or show a mismatch message. Correct the setting on the printer screen or in the print dialog.
.. 8. Update or Reinstall the Canon GX4070 Driver
If the printer is detected but not printing, the driver may be damaged, outdated, or incorrectly installed.
Canon India’s MAXIFY GX4070 support page lists the GX4070 MP Driver for Windows and describes it as providing full printing and scanning functionality for the product. The listed driver version on that support page is GX4070 MP Driver Ver. 1.02, last updated December 11, 2024. ([Canon][4])
..# Reinstall on Windows
1. Open **Settings**.
2. Go to **Bluetooth & devices > Printers & scanners**.
3. Remove the Canon GX4070 printer.
4. Restart your computer.
5. Download the correct GX4070 driver from Canon’s official support page.
6. Install the driver.
7. Choose USB or Wi-Fi setup.
8. Add the printer again.
9. Print a test page.
..# Reinstall on Mac
1. Open **System Settings**.
2. Go to **Printers & Scanners**.
3. Remove the Canon GX4070.
4. Restart your Mac.
5. Add the printer again using AirPrint or Canon’s recommended driver route.
6. Print a test page.
Driver reinstall is especially useful if the problem started after a Windows update, router change, or failed printer setup.
.. 9. Run Nozzle Check and Printhead Cleaning for Blank Pages
If the Canon GX4070 prints blank pages, faded text, missing colors, or broken lines, the issue may be ink flow or clogged nozzles.
Canon’s support guidance for cases where nothing prints or colors are wrong recommends printing a nozzle check pattern, cleaning the print head if ink is not ejecting properly, and using deep cleaning if normal cleaning does not resolve the issue. ([Canon][5])
Try this order:
1. Load plain paper.
2. Open the printer maintenance menu.
3. Print a nozzle check pattern.
4. Check if lines or colors are missing.
5. Run printhead cleaning.
6. Print the nozzle check again.
7. Run deep cleaning only if needed.
Do not run deep cleaning repeatedly without a gap because it uses more ink. If the printer has enough ink but the nozzle check remains blank, the printhead or ink delivery system may need service.
.. Check Ink Tanks and Maintenance Status
The Canon GX4070 is a MegaTank printer, so ink level and ink flow matter. Make sure ink tanks are not empty and the printer has been filled with the correct Canon ink bottles.
Check:
* Black ink level
* Cyan ink level
* Magenta ink level
* Yellow ink level
* Ink tank caps
* Any low-ink message
* Maintenance cartridge warning
* Air bubbles or refill-related issues after recent filling
Canon highlights the GX4070’s easy-to-replace maintenance cartridge as part of its maintenance design, which matters for high-volume printing environments. ([Canon][6])
If the printer shows a maintenance cartridge or service warning, follow the printer display instructions instead of forcing more print jobs.
.. What If Canon GX4070 Is Not Printing from Phone? 👉 1-866-490-0338(USA/UK) ☎️
If the GX4070 does not print from Android or iPhone, the issue is usually network discovery or app selection.
Try this:
1. Connect phone and printer to the same Wi-Fi.
2. Restart the router and printer.
3. Open the Canon printing app or phone print menu.
4. Remove the old printer entry.
5. Add the Canon GX4070 again.
6. Try printing a small photo or PDF.
If the phone is on mobile data and the printer is on Wi-Fi, printing may fail. Both devices usually need to be on the same local network.
.. What If Canon GX4070 Still Does Not Print? 👉 1-866-490-0338(USA/UK) ☎️
If all common fixes fail, isolate the problem.
Try these tests:
* Print from another laptop.
* Print from a mobile phone.
* Try USB instead of Wi-Fi.
* Try Wi-Fi instead of USB.
* Print a nozzle check from the printer panel.
* Print a test page from driver settings.
* Check if copying works from the scanner glass.
If copying works but computer printing does not, the problem is likely driver, queue, or connection. If copying also fails or prints blank, the issue is more likely ink system, printhead, paper feed, or hardware.
.. When Should You Contact Canon Support? 👉 1-866-490-0338(USA/UK) ☎️
Contact Canon support or an authorized service center if:
* The printer does not power on.
* Nozzle check is blank after cleaning.
* Ink levels are fine but nothing prints.
* The printer displays a service code.
* Paper feed fails repeatedly.
* The maintenance cartridge warning remains.
* The printer is under warranty.
* You suspect internal hardware damage.
Do not open internal parts beyond normal user maintenance. That may worsen the issue or affect warranty support.
.. People Also Ask: Canon GX4070 Printer Not Printing FAQs
..# Why is my Canon GX4070 printer not printing? 👉 1-866-490-0338(USA/UK) ☎️
Your Canon GX4070 may not print because of a stuck print queue, offline status, weak Wi-Fi, wrong default printer, paper setting mismatch, outdated driver, low ink, clogged printhead, or an error message on the printer display. Start by restarting the printer, clearing the queue, and checking connection status.
..# Why is my Canon GX4070 connected but not printing? 👉 1-866-490-0338(USA/UK) ☎️
If the printer is connected but not printing, the computer may be sending the job to the wrong printer, the queue may be stuck, or the driver may not be working correctly. Cancel all print jobs, set the GX4070 as default, and reinstall the official Canon driver if needed.
..# How do I fix Canon GX4070 offline on Windows? 👉 1-866-490-0338(USA/UK) ☎️
Open the print queue, click the **Printer** menu, and uncheck **Use Printer Offline** and **Pause Printing**. Then restart the printer and computer. If it goes offline again, reconnect the printer to Wi-Fi or reinstall the Canon GX4070 driver.
..# Why is my Canon GX4070 printing blank pages? 👉 1-866-490-0338(USA/UK) ☎️
Blank pages usually mean ink is not reaching the paper. Check ink levels, confirm the tanks are filled correctly, print a nozzle check pattern, and run printhead cleaning. Canon recommends nozzle check and printhead cleaning when nothing prints or print colors are wrong. ([Canon][5])
..# How do I clear the Canon GX4070 print queue? 👉 1-866-490-0338(USA/UK) ☎️
On Windows, go to **Settings > Bluetooth & devices > Printers & scanners**, select Canon GX4070, open the print queue, and cancel all documents. On Mac, open **Printers & Scanners**, select the printer, open the queue, and remove stuck jobs.
..# Why does my Canon GX4070 not print after changing Wi-Fi? 👉 1-866-490-0338(USA/UK) ☎️
After a router, password, or network name change, the printer may still be linked to the old network. Reconnect the GX4070 to the new Wi-Fi, make sure your computer is on the same network, and add the printer again.
..# Do I need to reinstall the Canon GX4070 driver? 👉 1-866-490-0338(USA/UK) ☎️
Yes, reinstalling the driver can help if the printer is detected but does not print, shows offline often, or stopped working after a system update. Use Canon’s official GX4070 support page for the correct driver. ([Canon][4])
..# Why does my Canon GX4070 show a paper mismatch? 👉 1-866-490-0338(USA/UK) ☎️
A paper mismatch appears when the paper size or type selected on the printer does not match the print settings from your computer or app. Check the rear tray setting, driver setting, and document paper size before printing again.
..# Can low ink stop Canon GX4070 from printing? 👉 1-866-490-0338(USA/UK) ☎️
Yes, low or empty ink can cause faded pages, missing colors, blank pages, or print failure. Since the GX4070 uses refillable ink tanks, check all ink levels visually and refill only with compatible Canon ink.
..# What should I do if Canon GX4070 still won’t print after all fixes? 👉 1-866-490-0338(USA/UK) ☎️
Test printing from another device, try USB instead of Wi-Fi, run a nozzle check, reinstall the driver, and check the printer display for service codes. If the printer still fails, contact Canon support or an authorized service center.
.. Conclusion
If your **Canon GX4070 printer is not printing**, do not assume the printer is broken. Start with the fastest fixes: restart the printer, clear the print queue, check offline status, confirm Wi-Fi or USB connection, match paper settings, and set the GX4070 as the default printer.
If the printer prints blank pages or poor output, move to ink checks, nozzle check, and printhead cleaning. If the computer cannot send jobs properly, reinstall the official Canon GX4070 driver. A step-by-step approach usually reveals whether the issue is connection, software, ink flow, paper setting, or hardware.